Skip to main content

CLI reference

This document provides the outputs of the following Semgrep CLI tool commands:

  • semgrep --help
  • semgrep scan --help
  • semgrep ci --help

In addition, this page also gives an overview of the Semgrep CLI exit codes.

Semgrep commands

For a list of available commands, run the following command:

semgrep --help

Command output:

Usage: semgrep [OPTIONS] COMMAND [ARGS]...

To get started quickly, run `semgrep scan --config auto`

Run `semgrep SUBCOMMAND --help` for more information on each subcommand

If no subcommand is passed, will run `scan` subcommand by default

Options:
-h, --help Show this message and exit.

Commands:
ci The recommended way to run semgrep in CI
install-semgrep-pro Install the Semgrep Pro Engine
login Obtain and save credentials for semgrep.dev
logout Remove locally stored credentials to semgrep.dev
lsp Start the Semgrep LSP server (useful for IDEs)
publish Upload rule to semgrep.dev
scan Run semgrep rules on files
show Show various information about Semgrep

Semgrep scan command options

To list all available semgrep scan options, run the following command:

semgrep scan --help

Command output:

NAME
semgrep scan - run semgrep rules on files

SYNOPSIS
semgrep scan [OPTION]… [TARGETS]…

DESCRIPTION
Searches TARGET paths for matches to rules or patterns. Defaults to
searching entire current working directory.

To get started quickly, run

semgrep --config auto .

This will automatically fetch rules for your project from the Semgrep
Registry. NOTE: Using `--config auto` will log in to the Semgrep
Registry with your project URL.

For more information about Semgrep, go to https://semgrep.dev.

NOTE: By default, Semgrep will report pseudonymous usage metrics to
its server if you pull your configuration from the Semgrep registry.
To learn more about how and why these metrics are collected, please
see https://semgrep.dev/docs/metrics. To modify this behavior, see the
--metrics option below.

ARGUMENTS
TARGETS
Files or folders to be scanned by semgrep.

OPTIONS
-a, --autofix
Apply autofix patches. WARNING: data loss can occur with this
flag. Make sure your files are stored in a version control system.
Note that this mode is experimental and not guaranteed to function
properly.

--allow-untrusted-validators
Allows running rules with validators from origins other than
semgrep.dev. Avoid running rules from origins you don't trust.

--baseline-commit=VAL (absent SEMGREP_BASELINE_COMMIT env)
Only show results that are not found in this commit hash. Aborts
run if not currently in a git directory, there are unstaged
changes, or given baseline hash doesn't exist.

-d, --dump-command-for-core
<internal, do not use>

--dataflow-traces
Explain how non-local values reach the location of a finding (only
affects text and SARIF output).

--debug
All of --verbose, but with additional debugging information.

--develop
Living on the edge.

--diff-depth=VAL (absent=2)
The depth of the Pro (interfile) differential scan, the number of
steps (both in the caller and callee sides) from the targets in
the call graph tracked by the deep preprocessor. Only applied in
differential scan mode. Default to 2.

--disable-nosem
negates --enable-nosem

--disable-version-check
negates --enable-version-check

--dryrun
If --dryrun, does not write autofixes to a file. This will print
the changes to the console. This lets you see the changes before
you commit to them. Only works with the --autofix flag. Otherwise
does nothing.

--dump-ast
If --dump-ast, shows AST of the input file or passed expression
and then exit (can use --json).

--dump-engine-path
<internal, do not use>

-e VAL, --pattern=VAL
Code search pattern. See
https://semgrep.dev/docs/writing-rules/pattern-syntax for
information on pattern features.

--emacs
Output results in Emacs single-line format.

--emacs-output=VAL
Write a copy of the emacs output to a file or post to or post to
URL.

--enable-nosem
Enables 'nosem'. Findings will not be reported on lines containing
a 'nosem' comment at the end. Enabled by default.

--enable-version-check (absent SEMGREP_ENABLE_VERSION_CHECK env)
Checks Semgrep servers to see if the latest version is run;
disabling this may reduce exit time after returning results.

--error
Exit 1 if there are findings. Useful for CI and scripts.

--exclude=PATTERN
Skip any file or directory whose path that matches PATTERN.
'--exclude=*.py' will ignore the following: 'foo.py',
'src/foo.py', 'foo.py/bar.sh'. '--exclude=tests' will ignore
'tests/foo.py' as well as 'a/b/tests/c/foo.py'. Multiple
'--exclude' options may be specified. PATTERN is a glob-style
pattern that uses the same syntax as gitignore and semgrepignore,
which is documented at
https://git-scm.com/docs/gitignore#_pattern_format

--exclude-rule=VAL
Skip any rule with the given id. Can add multiple times.

--experimental
Enable experimental features.

-f VAL, -c VAL, --config=VAL (absent SEMGREP_RULES env)
YAML configuration file, directory of YAML files ending in
.yml|.yaml, URL of a configuration file, or Semgrep registry entry
name. Use --config auto to automatically obtain rules tailored to
this project; your project URL will be used to log in to the
Semgrep registry. To run multiple rule files simultaneously, use
--config before every YAML, URL, or Semgrep registry entry name.
For example `semgrep --config p/python --config
myrules/myrule.yaml` See
https://semgrep.dev/docs/writing-rules/rule-syntax for information
on configuration file format.

--files-with-matches
Output only the names of files containing matches

--force-color (absent SEMGREP_FORCE_COLOR env)
Always include ANSI color in the output, even if not writing to a
TTY; defaults to using the TTY status

--gitlab-sast
Output results in GitLab SAST format.

--gitlab-sast-output=VAL
Write a copy of the GitLab SAST output to a file or post to or
post to URL.

--gitlab-secrets
Output results in GitLab Secrets format.

--gitlab-secrets-output=VAL
Write a copy of the GitLab Secrets output to a file or post to or
post to URL.

--historical-secrets
Scans git history using Secrets rules.

--include=PATTERN
Specify files or directories that should be scanned by semgrep,
excluding other files. This filter is applied after these other
filters: '--exclude' options, any filtering done by git (or other
SCM), and filtering by '.semgrepignore' files. Multiple
'--include' options can be specified. A file path is selected if
it matches at least one of the include patterns. PATTERN is a
glob-style pattern such as 'foo.*' that must match the path. For
example, specifying the language with '-l javascript' might
preselect files 'src/foo.jsx' and 'lib/bar.js'. Specifying one of
'--include=src', '--include=*.jsx', or '--include=src/foo.*' will
restrict the selection to the single file 'src/foo.jsx'. A choice
of multiple '--include' patterns can be specified. For example,
'--include=foo.* --include=bar.*' will select both 'src/foo.jsx'
and 'lib/bar.js'. Glob-style patterns follow the syntax supported
by gitignore and semgrepignore, which is documented at
https://git-scm.com/docs/gitignore#_pattern_format

--incremental-output
Output results incrementally.

--interfile-timeout=VAL (absent=0)
Maximum time to spend on interfile analysis. If set to 0 will not
have time limit. Defaults to 0 s for all CLI scans. For CI scans,
it defaults to 3 hours.

-j VAL, --jobs=VAL (absent=4)
Number of subprocesses to use to run checks in parallel. Defaults
to the number of cores detected on the system (1 if using --pro).

--json
Output results in Semgrep's JSON format.

--json-output=VAL
Write a copy of the json output to a file or post to or post to
URL.

--junit-xml
Output results in JUnit XML format.

--junit-xml-output=VAL
Write a copy of the JUnit XML output to a file or post to or post
to URL.

-l VAL, --lang=VAL
Parse pattern and all files in specified language. Must be used
with -e/--pattern.

--legacy
Prefer old (legacy) behavior.

--matching-explanations
Add debugging information in the JSON output to trace how
different parts of a rule are matched (a.k.a., "Inspect Rule" in
the Semgrep playground)

--max-chars-per-line=VAL (absent=160)
Maximum number of characters to show per line.

--max-lines-per-finding=VAL (absent=10)
Maximum number of lines of code that will be shown for each match
before trimming (set to 0 for unlimited).

--max-memory=VAL (absent=0)
Maximum system memory in MiB to use during the interfile
pre-processing phase, or when running a rule on a single file. If
set to 0, will not have memory limit. Defaults to 0. For CI scans
that use the Pro Engine, defaults to 5000 MiB.

--max-target-bytes=VAL (absent=1000000)
Maximum size for a file to be scanned by Semgrep, e.g '1.5MB'. Any
input program larger than this will be ignored. A zero or negative
value disables this filter. Defaults to 1000000 bytes

--metrics=VAL (absent=auto or SEMGREP_SEND_METRICS env)
Configures how usage metrics are sent to the Semgrep server. If
'auto', metrics are sent whenever the --config value pulls from
the Semgrep server. If 'on', metrics are always sent. If 'off',
metrics are disabled altogether and not sent. If absent, the
SEMGREP_SEND_METRICS environment variable value will be used. If
no environment variable, defaults to 'auto'.

--no-autofix
negates -a/--autofix

--no-dryrun
negates --dryrun

--no-error
negates --error

--no-force-color
negates --force-color

--no-git-ignore
negates --use-git-ignore

--no-rewrite-rule-ids
negates --rewrite-rule-ids

--no-secrets-validation
Disables secret validation.

--no-strict
negates --strict

--no-test-ignore-todo
negates --test-ignore-todo

--no-time
negates --time

--no-trace
negates --trace

-o VAL, --output=VAL
Save search results to a file or post to URL. Default is to print
to stdout.

--optimizations=VAL (absent=all)
Turn on/off optimizations. Default = 'all'. Use 'none' to turn all
optimizations off.

--oss-only
Run using only OSS features, even if the Semgrep Pro toggle is on.

--pro
Inter-file analysis and Pro languages (currently Apex and Elixir).
Requires Semgrep Pro Engine. See
https://semgrep.dev/products/pro-engine/ for more.

--pro-intrafile
Intra-file inter-procedural taint analysis. Implies
--pro-languages. Requires Semgrep Pro Engine. See
https://semgrep.dev/products/pro-engine/ for more.

--pro-languages
Enable Pro languages (currently Apex and Elixir). Requires Semgrep
Pro Engine. See https://semgrep.dev/products/pro-engine/ for more.

--profile
<undocumented>

--project-root=VAL
The project root for gitignore and semgrepignore purposes is
detected automatically from the presence of a .git/ directory in
the current directory or one of its parents. If not found, the
current directory is used as the project root. This option forces
a specific directory to be the project root. This is useful for
testing or for restoring compatibility with older semgrep
implementations that only looked for a .semgrepignore file in the
current directory.

-q, --quiet
Only output findings.

--remote=VAL
Remote will quickly checkout and scan a remote git repository of
the format "http[s]://<WEBSITE>/.../<REPO>.git". Must be run with
--pro Incompatible with --project-root. Note this requires an
empty CWD as this command will clone the repository into the CWD

--replacement=VAL
An autofix expression that will be applied to any matches found
with --pattern. Only valid with a command-line specified pattern.

--rewrite-rule-ids
Rewrite rule ids when they appear in nested sub-directories (Rule
'foo' in test/rules.yaml will be renamed 'test.foo').

--sarif
Output results in SARIF format.

--sarif-output=VAL
Write a copy of the SARIF output to a file or post to or post to
URL.

--scan-unknown-extensions
If true, target files specified directly on the command line will
bypass normal language detection. They will be analyzed according
to the value of --lang if applicable, or otherwise with the
analyzers/languages specified in the Semgrep rule(s) regardless of
file extension or file type. This setting doesn't apply to target
files discovered by scanning folders. Defaults to false.

--secrets
Run Semgrep Secrets product, including support for secret
validation. Requires access to Secrets, contact
support@semgrep.com for more information.

--severity=VAL
Report findings only from rules matching the supplied severity
level. By default all applicable rules are run. Can add multiple
times. Each should be one of INFO, WARNING, or ERROR.

--show-supported-languages
Print a list of languages that are currently supported by Semgrep.

--skip-unknown-extensions
negates --scan-unknown-extensions

--strict
Return a nonzero exit code when WARN level errors are encountered.
Fails early if invalid configuration files are present. Defaults
to --no-strict.

--test
Run test suite.

--test-ignore-todo
If --test-ignore-todo, ignores rules marked as '#todoruleid:' in
test files.

--text
Output results in text format.

--text-output=VAL
Write a copy of the text output to a file or post to or post to
URL.

--time
Include a timing summary with the results. If output format is
json, provides times for each pair (rule, target).

--timeout=VAL (absent=5.)
Maximum time to spend running a rule on a single file in seconds.
If set to 0 will not have time limit. Defaults to 5.0 s.

--timeout-threshold=VAL (absent=3)
Maximum number of rules that can time out on a file before the
file is skipped. If set to 0 will not have limit. Defaults to 3.

--trace
Record traces from Semgrep scans to help debugging. This feature
is meant for internal use and may be changed or removed without
warning.

--trace-endpoint=VAL
Endpoint to send OpenTelemetry traces to, if `--trace` is present.
The value may be `semgrep-prod` (default), `semgrep-dev`,
`semgrep-local`, or any valid URL. This feature is meant for
internal use and may be changed or removed wihtout warning.

--use-git-ignore
Skip files ignored by git. Scanning starts from the root folder
specified on the Semgrep command line. Normally, if the scanning
root is within a git repository, only the tracked files and the
new files would be scanned. Git submodules and git- ignored files
would normally be skipped. --no-git-ignore will disable git-aware
filtering. Setting this flag does nothing if the scanning root is
not in a git repository.

--use-osemgrep-sarif
Output results using osemgrep.

-v, --verbose
Show more details about what rules are running, which files failed
to parse, etc.

--validate
Validate configuration file(s). This will check YAML files for
errors and run 'p/semgrep-rule-lints' on the YAML files. No search
is performed.

--version
Show the version and exit.

--vim
Output results in vim single-line format.

--vim-output=VAL
Write a copy of the vim output to a file or post to or post to
URL.

--x-ls
[INTERNAL] List the selected target files and the skipped target
files before any rule-specific or language-specific filtering.
Then exit. The output format is unspecified. THIS OPTION IS NOT
PART OF THE SEMGREP API AND MAY CHANGE OR DISAPPEAR WITHOUT
NOTICE.

COMMON OPTIONS
--help[=FMT] (default=auto)
Show this help in format FMT. The value FMT must be one of auto,
pager, groff or plain. With auto, the format is pager or plain
whenever the TERM env var is dumb or undefined.

EXIT STATUS
semgrep scan exits with:

0 on success.

123 on indiscriminate errors reported on standard error.

124 on command line parsing errors.

125 on unexpected internal errors (bugs).

ENVIRONMENT
These environment variables affect the execution of semgrep scan:

SEMGREP_BASELINE_COMMIT
See option --baseline-commit.

SEMGREP_ENABLE_VERSION_CHECK
See option --enable-version-check.

SEMGREP_FORCE_COLOR
See option --force-color.

SEMGREP_RULES
See option --config.

SEMGREP_SEND_METRICS
See option --metrics.

AUTHORS
Semgrep Inc. <support@semgrep.com>

BUGS
If you encounter an issue, please report it at
https://github.com/semgrep/semgrep/issues

Semgrep ci command options

To list all available semgrep ci options, run the following command:

semgrep ci --help

Command output:

NAME
semgrep ci - the recommended way to run semgrep in CI

SYNOPSIS
semgrep ci [OPTION]… [TARGETS]…

DESCRIPTION
In pull_request/merge_request (PR/MR) contexts, `semgrep ci` will only
report findings that were introduced by the PR/MR.

When logged in, `semgrep ci` runs rules configured on Semgrep App and
sends findings to your findings dashboard.

Only displays findings that were marked as blocking.

ARGUMENTS
TARGETS
Files or folders to be scanned by semgrep.

OPTIONS
-- semgrep-repo-display-name=VAL (absent SEMGREP_REPO_DISPLAY_NAME
env)
The name the repository should be displayed as for this scan.
Setting it allows users to scan individual repos in one monorepo
separately.

-a, --autofix
Apply autofix patches. WARNING: data loss can occur with this
flag. Make sure your files are stored in a version control system.
Note that this mode is experimental and not guaranteed to function
properly.

--allow-untrusted-validators
Allows running rules with validators from origins other than
semgrep.dev. Avoid running rules from origins you don't trust.

--audit-on=VAL (absent SEMGREP_AUDIT_ON env)

--baseline-commit=VAL (absent SEMGREP_BASELINE_COMMIT env)
Only show results that are not found in this commit hash. Aborts
run if not currently in a git directory, there are unstaged
changes, or given baseline hash doesn't exist.

--code
Run Semgrep Code (SAST) product.

-d, --dump-command-for-core
<internal, do not use>

--dataflow-traces
Explain how non-local values reach the location of a finding (only
affects text and SARIF output).

--debug
All of --verbose, but with additional debugging information.

--develop
Living on the edge.

--diff-depth=VAL (absent=2)
The depth of the Pro (interfile) differential scan, the number of
steps (both in the caller and callee sides) from the targets in
the call graph tracked by the deep preprocessor. Only applied in
differential scan mode. Default to 2.

--disable-nosem
negates --enable-nosem

--disable-version-check
negates --enable-version-check

--dry-run
When set, will not start a scan on semgrep.dev and will not report
findings. Instead will print out json objects it would have sent.

--dryrun
If --dryrun, does not write autofixes to a file. This will print
the changes to the console. This lets you see the changes before
you commit to them. Only works with the --autofix flag. Otherwise
does nothing.

--dump-ast
If --dump-ast, shows AST of the input file or passed expression
and then exit (can use --json).

--dump-engine-path
<internal, do not use>

-e VAL, --pattern=VAL
Code search pattern. See
https://semgrep.dev/docs/writing-rules/pattern-syntax for
information on pattern features.

--emacs
Output results in Emacs single-line format.

--emacs-output=VAL
Write a copy of the emacs output to a file or post to or post to
URL.

--enable-nosem
Enables 'nosem'. Findings will not be reported on lines containing
a 'nosem' comment at the end. Enabled by default.

--enable-version-check (absent SEMGREP_ENABLE_VERSION_CHECK env)
Checks Semgrep servers to see if the latest version is run;
disabling this may reduce exit time after returning results.

--error
Exit 1 if there are findings. Useful for CI and scripts.

--exclude=PATTERN
Skip any file or directory whose path that matches PATTERN.
'--exclude=*.py' will ignore the following: 'foo.py',
'src/foo.py', 'foo.py/bar.sh'. '--exclude=tests' will ignore
'tests/foo.py' as well as 'a/b/tests/c/foo.py'. Multiple
'--exclude' options may be specified. PATTERN is a glob-style
pattern that uses the same syntax as gitignore and semgrepignore,
which is documented at
https://git-scm.com/docs/gitignore#_pattern_format

--exclude-rule=VAL
Skip any rule with the given id. Can add multiple times.

--experimental
Enable experimental features.

-f VAL, -c VAL, --config=VAL (absent SEMGREP_RULES env)
YAML configuration file, directory of YAML files ending in
.yml|.yaml, URL of a configuration file, or Semgrep registry entry
name. Use --config auto to automatically obtain rules tailored to
this project; your project URL will be used to log in to the
Semgrep registry. To run multiple rule files simultaneously, use
--config before every YAML, URL, or Semgrep registry entry name.
For example `semgrep --config p/python --config
myrules/myrule.yaml` See
https://semgrep.dev/docs/writing-rules/rule-syntax for information
on configuration file format.

--files-with-matches
Output only the names of files containing matches

--force-color (absent SEMGREP_FORCE_COLOR env)
Always include ANSI color in the output, even if not writing to a
TTY; defaults to using the TTY status

--gh-token=VAL (absent GH_TOKEN env)
The GitHub token.

--github-api-url=VAL (absent GITHUB_API_URL env)
The GitHub API URL.

--github-event-name=VAL (absent GITHUB_EVENT_NAME env)
The GitHub event name.

--github-event-path=VAL (absent GITHUB_EVENT_PATH env)
The GitHub event path.

--github-head-ref=VAL (absent GITHUB_HEAD_REF env)
The GitHub HEAD ref.

--github-ref=VAL (absent GITHUB_REF env)
The GitHub ref.

--github-repository=VAL (absent GITHUB_REPOSITORY env)
The GitHub repository.

--github-repository-id=VAL (absent GITHUB_REPOSITORY_ID env)
The ID of the repository.

--github-repository-owner-id=VAL (absent GITHUB_REPOSITORY_OWNER_ID
env)
The repository owner's account ID.

--github-run-id=VAL (absent GITHUB_RUN_ID env)
The GitHub run ID.

--github-server-url=VAL (absent=https://github.com or
GITHUB_SERVER_URL env)
The GitHub server URL.

--github-sha=VAL (absent GITHUB_SHA env)
The GitHub commit.

--gitlab-sast
Output results in GitLab SAST format.

--gitlab-sast-output=VAL
Write a copy of the GitLab SAST output to a file or post to or
post to URL.

--gitlab-secrets
Output results in GitLab Secrets format.

--gitlab-secrets-output=VAL
Write a copy of the GitLab Secrets output to a file or post to or
post to URL.

--historical-secrets
Scans git history using Secrets rules.

--include=PATTERN
Specify files or directories that should be scanned by semgrep,
excluding other files. This filter is applied after these other
filters: '--exclude' options, any filtering done by git (or other
SCM), and filtering by '.semgrepignore' files. Multiple
'--include' options can be specified. A file path is selected if
it matches at least one of the include patterns. PATTERN is a
glob-style pattern such as 'foo.*' that must match the path. For
example, specifying the language with '-l javascript' might
preselect files 'src/foo.jsx' and 'lib/bar.js'. Specifying one of
'--include=src', '--include=*.jsx', or '--include=src/foo.*' will
restrict the selection to the single file 'src/foo.jsx'. A choice
of multiple '--include' patterns can be specified. For example,
'--include=foo.* --include=bar.*' will select both 'src/foo.jsx'
and 'lib/bar.js'. Glob-style patterns follow the syntax supported
by gitignore and semgrepignore, which is documented at
https://git-scm.com/docs/gitignore#_pattern_format

--incremental-output
Output results incrementally.

--interfile-timeout=VAL (absent=0)
Maximum time to spend on interfile analysis. If set to 0 will not
have time limit. Defaults to 0 s for all CLI scans. For CI scans,
it defaults to 3 hours.

--internal-ci-scan-results
<internal, do not use>

-j VAL, --jobs=VAL (absent=4)
Number of subprocesses to use to run checks in parallel. Defaults
to the number of cores detected on the system (1 if using --pro).

--json
Output results in Semgrep's JSON format.

--json-output=VAL
Write a copy of the json output to a file or post to or post to
URL.

--junit-xml
Output results in JUnit XML format.

--junit-xml-output=VAL
Write a copy of the JUnit XML output to a file or post to or post
to URL.

-l VAL, --lang=VAL
Parse pattern and all files in specified language. Must be used
with -e/--pattern.

--legacy
Prefer old (legacy) behavior.

--matching-explanations
Add debugging information in the JSON output to trace how
different parts of a rule are matched (a.k.a., "Inspect Rule" in
the Semgrep playground)

--max-chars-per-line=VAL (absent=160)
Maximum number of characters to show per line.

--max-lines-per-finding=VAL (absent=10)
Maximum number of lines of code that will be shown for each match
before trimming (set to 0 for unlimited).

--max-memory=VAL (absent=0)
Maximum system memory in MiB to use during the interfile
pre-processing phase, or when running a rule on a single file. If
set to 0, will not have memory limit. Defaults to 0. For CI scans
that use the Pro Engine, defaults to 5000 MiB.

--max-target-bytes=VAL (absent=1000000)
Maximum size for a file to be scanned by Semgrep, e.g '1.5MB'. Any
input program larger than this will be ignored. A zero or negative
value disables this filter. Defaults to 1000000 bytes

--metrics=VAL (absent=auto or SEMGREP_SEND_METRICS env)
Configures how usage metrics are sent to the Semgrep server. If
'auto', metrics are sent whenever the --config value pulls from
the Semgrep server. If 'on', metrics are always sent. If 'off',
metrics are disabled altogether and not sent. If absent, the
SEMGREP_SEND_METRICS environment variable value will be used. If
no environment variable, defaults to 'auto'.

--no-autofix
negates -a/--autofix

--no-dryrun
negates --dryrun

--no-error
negates --error

--no-force-color
negates --force-color

--no-git-ignore
negates --use-git-ignore

--no-rewrite-rule-ids
negates --rewrite-rule-ids

--no-secrets-validation
Disables secret validation.

--no-strict
negates --strict

--no-suppress-errors
negates --suppress-errors

--no-test-ignore-todo
negates --test-ignore-todo

--no-time
negates --time

--no-trace
negates --trace

-o VAL, --output=VAL
Save search results to a file or post to URL. Default is to print
to stdout.

--optimizations=VAL (absent=all)
Turn on/off optimizations. Default = 'all'. Use 'none' to turn all
optimizations off.

--oss-only
Run using only OSS features, even if the Semgrep Pro toggle is on.

--pro
Inter-file analysis and Pro languages (currently Apex and Elixir).
Requires Semgrep Pro Engine. See
https://semgrep.dev/products/pro-engine/ for more.

--pro-intrafile
Intra-file inter-procedural taint analysis. Implies
--pro-languages. Requires Semgrep Pro Engine. See
https://semgrep.dev/products/pro-engine/ for more.

--pro-languages
Enable Pro languages (currently Apex and Elixir). Requires Semgrep
Pro Engine. See https://semgrep.dev/products/pro-engine/ for more.

--profile
<undocumented>

--project-root=VAL
The project root for gitignore and semgrepignore purposes is
detected automatically from the presence of a .git/ directory in
the current directory or one of its parents. If not found, the
current directory is used as the project root. This option forces
a specific directory to be the project root. This is useful for
testing or for restoring compatibility with older semgrep
implementations that only looked for a .semgrepignore file in the
current directory.

-q, --quiet
Only output findings.

--remote=VAL
Remote will quickly checkout and scan a remote git repository of
the format "http[s]://<WEBSITE>/.../<REPO>.git". Must be run with
--pro Incompatible with --project-root. Note this requires an
empty CWD as this command will clone the repository into the CWD

--replacement=VAL
An autofix expression that will be applied to any matches found
with --pattern. Only valid with a command-line specified pattern.

--rewrite-rule-ids
Rewrite rule ids when they appear in nested sub-directories (Rule
'foo' in test/rules.yaml will be renamed 'test.foo').

--sarif
Output results in SARIF format.

--sarif-output=VAL
Write a copy of the SARIF output to a file or post to or post to
URL.

--scan-unknown-extensions
If true, target files specified directly on the command line will
bypass normal language detection. They will be analyzed according
to the value of --lang if applicable, or otherwise with the
analyzers/languages specified in the Semgrep rule(s) regardless of
file extension or file type. This setting doesn't apply to target
files discovered by scanning folders. Defaults to false.

--secrets
Run Semgrep Secrets product, including support for secret
validation. Requires access to Secrets, contact
support@semgrep.com for more information.

--semgrep-branch=VAL (absent SEMGREP_BRANCH env)
The Git branch.

--semgrep-commit=VAL (absent SEMGREP_COMMIT env)
The commit of the Git repository.

--semgrep-job-url=VAL (absent SEMGREP_JOB_URL env)
The job URL.

--semgrep-pr-id=VAL (absent SEMGREP_PR_ID env)
The PR/MR ID.

--semgrep-pr-title=VAL (absent SEMGREP_PR_TITLE env)
The PR/MR title.

--semgrep-repo-name=VAL (absent SEMGREP_REPO_NAME env)
The name of the Git repository.

--semgrep-repo-url=VAL (absent SEMGREP_REPO_URL env)
The URL of the Git repository.

--severity=VAL
Report findings only from rules matching the supplied severity
level. By default all applicable rules are run. Can add multiple
times. Each should be one of INFO, WARNING, or ERROR.

--show-supported-languages
Print a list of languages that are currently supported by Semgrep.

--skip-unknown-extensions
negates --scan-unknown-extensions

--strict
Return a nonzero exit code when WARN level errors are encountered.
Fails early if invalid configuration files are present. Defaults
to --no-strict.

--subdir=VAL (absent=/src)
Scan only a subdirectory of this folder. This creates a project
specific to the subdirectory unless SEMGREP_REPO_DISPLAY_NAME is
set. Expects a relative path. (Note that when two scans have the
same SEMGREP_REPO_DISPLAY_NAME but different targeted directories,
the results of the second scan overwrite the first.)

--supply-chain
Run Semgrep Supply Chain product.

--suppress-errors (absent SEMGREP_SUPPRESS_ERRORS env)
Configures how the CI command reacts when an error occurs. If
true, encountered errors are suppressed and the exit code is zero
(success). If false, encountered errors are not suppressed and the
exit code is non-zero (failure).

--test
Run test suite.

--test-ignore-todo
If --test-ignore-todo, ignores rules marked as '#todoruleid:' in
test files.

--text
Output results in text format.

--text-output=VAL
Write a copy of the text output to a file or post to or post to
URL.

--time
Include a timing summary with the results. If output format is
json, provides times for each pair (rule, target).

--timeout=VAL (absent=5.)
Maximum time to spend running a rule on a single file in seconds.
If set to 0 will not have time limit. Defaults to 5.0 s.

--timeout-threshold=VAL (absent=3)
Maximum number of rules that can time out on a file before the
file is skipped. If set to 0 will not have limit. Defaults to 3.

--trace
Record traces from Semgrep scans to help debugging. This feature
is meant for internal use and may be changed or removed without
warning.

--trace-endpoint=VAL
Endpoint to send OpenTelemetry traces to, if `--trace` is present.
The value may be `semgrep-prod` (default), `semgrep-dev`,
`semgrep-local`, or any valid URL. This feature is meant for
internal use and may be changed or removed wihtout warning.

--use-git-ignore
Skip files ignored by git. Scanning starts from the root folder
specified on the Semgrep command line. Normally, if the scanning
root is within a git repository, only the tracked files and the
new files would be scanned. Git submodules and git- ignored files
would normally be skipped. --no-git-ignore will disable git-aware
filtering. Setting this flag does nothing if the scanning root is
not in a git repository.

--use-osemgrep-sarif
Output results using osemgrep.

-v, --verbose
Show more details about what rules are running, which files failed
to parse, etc.

--validate
Validate configuration file(s). This will check YAML files for
errors and run 'p/semgrep-rule-lints' on the YAML files. No search
is performed.

--version
Show the version and exit.

--vim
Output results in vim single-line format.

--vim-output=VAL
Write a copy of the vim output to a file or post to or post to
URL.

--x-ls
[INTERNAL] List the selected target files and the skipped target
files before any rule-specific or language-specific filtering.
Then exit. The output format is unspecified. THIS OPTION IS NOT
PART OF THE SEMGREP API AND MAY CHANGE OR DISAPPEAR WITHOUT
NOTICE.

COMMON OPTIONS
--help[=FMT] (default=auto)
Show this help in format FMT. The value FMT must be one of auto,
pager, groff or plain. With auto, the format is pager or plain
whenever the TERM env var is dumb or undefined.

EXIT STATUS
semgrep ci exits with:

0 on success.

123 on indiscriminate errors reported on standard error.

124 on command line parsing errors.

125 on unexpected internal errors (bugs).

ENVIRONMENT
These environment variables affect the execution of semgrep ci:

GH_TOKEN
See option --gh-token.

GITHUB_API_URL
See option --github-api-url.

GITHUB_EVENT_NAME
See option --github-event-name.

GITHUB_EVENT_PATH
See option --github-event-path.

GITHUB_HEAD_REF
See option --github-head-ref.

GITHUB_REF
See option --github-ref.

GITHUB_REPOSITORY
See option --github-repository.

GITHUB_REPOSITORY_ID
See option --github-repository-id.

GITHUB_REPOSITORY_OWNER_ID
See option --github-repository-owner-id.

GITHUB_RUN_ID
See option --github-run-id.

GITHUB_SERVER_URL
See option --github-server-url.

GITHUB_SHA
See option --github-sha.

SEMGREP_AUDIT_ON
See option --audit-on.

SEMGREP_BASELINE_COMMIT
See option --baseline-commit.

SEMGREP_BRANCH
See option --semgrep-branch.

SEMGREP_COMMIT
See option --semgrep-commit.

SEMGREP_ENABLE_VERSION_CHECK
See option --enable-version-check.

SEMGREP_FORCE_COLOR
See option --force-color.

SEMGREP_JOB_URL
See option --semgrep-job-url.

SEMGREP_PR_ID
See option --semgrep-pr-id.

SEMGREP_PR_TITLE
See option --semgrep-pr-title.

SEMGREP_REPO_DISPLAY_NAME
See option -- semgrep-repo-display-name.

SEMGREP_REPO_NAME
See option --semgrep-repo-name.

SEMGREP_REPO_URL
See option --semgrep-repo-url.

SEMGREP_RULES
See option --config.

SEMGREP_SEND_METRICS
See option --metrics.

SEMGREP_SUPPRESS_ERRORS
See option --suppress-errors.

AUTHORS
Semgrep Inc. <support@semgrep.com>

BUGS
If you encounter an issue, please report it at
https://github.com/semgrep/semgrep/issues

Ignore files

The Semgrep command line tool supports a .semgrepignore file that follows .gitignore syntax and is used to skip files and directories during scanning. This is commonly used to avoid vendor and test related code. For a complete example, see the .semgrepignore file on Semgrep’s source code.

In addition to .semgrepignore there are several methods to set up ignore patterns. See Ignoring files, folders, or code.

Connect to Semgrep Registry through a proxy

Semgrep uses the Python3 requests library. Set the following environment variables to point to your proxy:

export HTTP_PROXY="HTTP_PROXY_URL"
export HTTPS_PROXY="HTTPS_PROXY_URL"

For example:

export HTTP_PROXY="http://10.10.1.10:3128"
export HTTPS_PROXY="http://10.10.1.10:1080"

Exit codes

Semgrep can finish with the following exit codes:

  • 0: Semgrep ran successfully and found no errors (or did find errors, but the --error flag is not being used).
  • 1: Semgrep ran successfully and found issues in your code (while using the --error flag).
  • 2: Semgrep failed.
  • 3: Invalid syntax of the scanned language. This error occurs only while using the --strict flag.
  • 4: Semgrep encountered an invalid pattern in the rule schema.
  • 5: Semgrep configuration is not valid YAML.
  • 7: At least one rule in the configuration is invalid.
  • 8: Semgrep does not understand specified language.
  • 13: The API key is invalid.
  • 14: Semgrep scan failed.
tip

To view the exit code when running semgrep scan, enter the following command immediately after the Semgrep scan finishes:

echo $?

The output is a single exit code, such as:

1

Not finding what you need in this doc? Ask questions in our Community Slack group, or see Support for other ways to get help.